WebSwitch Plus – 2 Power Outputs 2 Inputs and 16 Temp Inputs – 100-240Vac
- Description
- Features and Applications
- Specifications
Description
WebSwitch Plus™ Designed for server room applications, including remote server reboot. Connect one or two servers (or communication devices such as modems, routers, etc.) to the WebSwitch’s power outlets and use it to reboot these devices when required. Using a web browser, you can reboot your devices from anywhere in the world. You can also configure WebSwitch to automatically reboot either or both of the devices when network communications to them fail or when the devices fail to respond to ping requests. WebSwitch Plus also has additional features such as temperature monitoring and dry contact inputs for server room monitoring enabling alerts etc. when limits are exceeded.
WebSwitch Plus is highly configurable. Times between pings can be specified, plus the time between unsuccessful ping requests, how many times a ping request is sent before rebooting the device, and the time before the first ping is sent after startup.
WebSwitch Plus can be set up and monitored using a standard web browser on a computer or smartphone and does not require any cloud services or reoccurring fees.
Remote Server Reboot and/or Auto Reboot
In the picture example, a server is plugged into one of the WebSwitch Plus’ AC outlets. The WebSwitch Plus is configured, by the user, to ping the server every 120 seconds to ensure it is running properly.
Note: The AC Input and Outputs meets international standards.
Automatic Reboot
If the ping request fails, WebSwitch Plus is configured to then send out another ping request after 10 seconds and if that request also fails, it will automatically reboot the server and internally log the event. It can also send out an email and text alert to an IT tech and administrator.
Monitor Server Temperature
WebSwitch Plus can also monitor server temperatures and if the temperature exceeds a user-specified threshold, it logs the event and sends an email/text alert to the appropriate personnel.
No Cloud Services or Monthly Fees
The ControlByWeb products can be stand-alone, independent devices. Therefore incurs no monthly fees, and no additional software to install to manage and receive alerts.
Remote Power Control
The WebSwitch Plus is ideal for remote power control, reboot, and automatic reboot of any network device. Such as plug in a fan, heater, computer, server, camera, other network equipment—any AC device—enabling the ability to remotely power devices on or off. Independently control two power outlets using a standard web browser…no special software required.
WebSwitch Plus Features
- Automatic and Manual Remote Reboot
- Real-time clock, can automatically adjusts for daylight savings time, sync with NTP server
- Built-in no-code user interface for easy logic programming
- Email Notifications
- Data Logging
- Added Relay Contact Protection
- Supports up to 16 temperature sensors or up to 8 temp/humidity sensors
WebSwitch Plus Applications
- Server Room Monitoring
- Lighting Control
- IP Camera Reboot
- Many more
Power Requirements
- Voltage: 100-240V AC (47-63Hz)
- Input Frequency: 47-63Hz
- Input Connector: IEC 320 Appliance Connector (C14 Male)
- Max Current: 10A (DO NOT USE WEBSWITCH PLUS TO CONTROL MORE THAN 10 AMPS – BOTH OUTLETS)*
Relay Contacts
- Number of Relays: 2
- Relay Connector: IEC C13 Female
- Contact Type: SPDT (Form C)
- Load Type: General Purpose
- Contact Resistance: < 30 milliohms initial
- Contact Material: AgSnO2
- Electrical Life: 100K cycles (Typical)
- Mechanical Life: 10M cycles (Typical)
- Environmental Rating: Over voltage Category II, Pollution Degree 2
- Relay Modes: ON/OFF or Pulse/Reboot
- Pulse Timer Duration: 0.1 to 86,400 Seconds (1-day)
Digital Inputs
- Number of Inputs: 2
- Type: Non-Isolated
- Voltage Range: 0-5VDC
- Current: 47K Pullup
- Minimum Hold Time: 20ms
- Input Isolation: Non-Isolated
- Input Functions: Emails Alerts, SNMP Traps
Temperature Sensors
- Maximum Number of Sensors: 16
- Type: Dallas Semiconductor DS18B20
- Temperature Range: -67°F to 257°F (-55°C to +125°C)
- Accuracy: ±0.5°C (from -10°C to +85°C)
- Sensor Functions: Monitor Temperature, Log Temperature, Email Alerts, SNMP Traps
Real-Time Clock:
- Manual or NTP(Network Time Protocol) setup
- NTP Sync Period: Once, Daily, Weekly, On Powerup
- Auto Daylight Savings Adjustment
- Battery (capacitor) Power Backup
Capacitor Power Backup
- Backup Functions: Retain Real-Time Clock, External Variables, Outlet State.
- Backup Duration: 24 hours
Network
- Type: 10/100 Base-T Ethernet Port
- Setup: Static or DHCP IP address configuration
Connectors
- Output Connectors: IEC 320 Appliance Connector (C13 Female)
- Accessory Input: 5-Position, 3.81mm
- Network: 8-pin RJ-45
LED Indicators
- Number of LEDs: 5
- Power on
- Out On 1-2
- Network linked
- Network activity
Physical
- Operating Temperature: -4°F to 104°F (-20°C to 40°C)
- Size:
- 10.65 inches (27.11 cm) wide
- 1.75 inches (4.44 cm) tall
- 3.29 inches (8.36 cm) deep
- Weight: 1 lb. 3 oz. (542 grams)
- Enclosure Material: Lexan 940 Polycarbonate Plastic
- Enclosure Flame Rating: UL94 V0
Protocols
- HTTP(S), JSON, XML, Modbus TCP/IP, SNMP, Remote Services
Logging
- Log File Size: 3072K (Max 50688 logs)
- Storage: Nonvolatile Flash
- Buffer Architecture: Circular Buffer
Log data can be periodically read and stored on a computer
Password Settings
- Password protection on setup page: Yes
- Password protection on control page: Optional
- Password Encoding: Base 64
- Password Length: 6-18 Characters
Electromagnetic Compliance
- IEC CISPR 22, CISPR 24
- FCC 47CFR15
- EU EN55024, EN55022
- EN55022:2006: Class B
- EN61000-3-2
- EN61000-3-3
- EN55024:2006
- IEC 61000-4-2
- IEC 61000-4-3
- IEC 61000-4-4
- IEC 61000-4-5
- IEC 61000-4-6
- IEC 61000-4-8
- IEC 61000-4-11
- ITE-Class B
Product Safety Compliance
- CAN/CSA-C22.2 No.60950-1-03 First Edition
- IEC 61010-1
